What is the default router IP 192.168.1.100?
How to log into this IP address to the admin panel?
How to change the password of the admin login?
If you forget the password, how to reset it?
Go to find details from this post written byMiniTool.
What Is 192.168.1.100 for?
192.168.1.100 is a private IP address that is used by default by modems or Wi-Fi routers for admin login.
to set up the administrator access for the router and web link configurations.
Note that not all routers use 192.168.1.100 as the standard.
Compared to a public IP address, the private IP 192.168.1.100 is free and it saves IP address resources.
Logging in to your router is necessary.
Well then, how to get in to 192.168.1.100?
It is easy to operate.
Step 1: If you are using a Thecus, Planex, Linksys, Atcom, etc.
router, open a web surfing app and visithttp://192.168.1.100or192.168.1.100in the address bar.
You will be redirected to the login page for your admin panel.
Dont pop in the incorrect address like 192.168 1.100, www 192.168 1.100, 192.168..1.100.
Or else, you cannot dive into the admin page.
Just go to the corresponding menu and configure the router and internet.
Also, you’ve got the option to change the username for the router here.
To do this task, the simple way is to reset your router.
This can be done by pressing a small button on your router.
Usually, it’s possible for you to find it on the back.
Just press the reset button for at least 20 seconds to reset the router to its default prefs.
The login password is also reset.
Public vs Private IP address: what are the differences?
This post shows you differences between public IP address and private IP address.
Lets go to look through two common reasons for this issue as well as the solutions.
The connection between your router and cable go wrong
Correctly connect your router to a computer.
check that the cable is available for normal use.
you might look to see if the connection is normal by opening CMD and runningPing 192.168.1.100.
