you’re able to also find a data recovery tool to help rescue your files.
kindly try them to find one that can help you turn on your box.
In most cases, failing to start your rig is because of insufficient power supply.
Step 1: Shut down your HP laptop and remove the battery from the laptop.
Step 2: Find an outlet that is functioning properly.
Step 3: Plug your laptop into the outlet using the power cable.
If your laptop turns on, it means your battery has a problem.
you gotta buy a new battery for your rig.
What about the CMOS battery which stores the BIOS tweaks in the motherboard?
It could also be the reason why your HP laptop cant boot.
Thus, you should use a new CMOS battery to replace the old one on your unbootable HP laptop.
c’mon see to it the cables are connected in the right manner.
If you are curious about it, find the answer in this post.
it’s possible for you to even get tips to improve battery lifespan.
Method 2: Remove External Disks and Devices
Step 1: Turn off the HP laptop.
Step 2: Remove all external disks and devices connected to the laptop.
Step 3: attempt to turn on your laptop by pressing the power button.
At this time, you gotta check your screen with the following steps.
Step 1: Disconnect all the external devices to prevent them from interfering with the computer startup process.
Step 2: Turn off the light to see whether the screen displays very faintly.
If yes, you’re free to make a run at turn up your laptop screens brightness.
If this doesnt work, your screens inverter may have a problem.
Read the passage to knowhow to connect the laptop to a TV without an HDMI cable.
Then hold an Fn key and press the F4 to switch between the laptop display and the external monitor.
Step 2: Remove all the unnecessary external hardware and devices from it.
Step 3: check that there is no power charger/AC adapter connected and remove the battery from the notebook.
Step 5: Put the battery back and re-connect the power charger/AC adapter.
(Dont connect other external devices to the notebook until it boots up.)
Step 6: Power on your HP notebook by pressing the Power button.
Step 7: ClickContinueif you are brought to the Options window.
Step 8: Look for theStart Windows Normallyoption and select it.
Step 9: PressEnterand then wait for your notebook to start successfully.
What if your laptop contains a sealed or non-removable battery?
Step 2: Remove all port replicators or docking stations from your notebook.
Also, disconnect all the external peripheral devices from the notebook.
Step 3: ensure the AC adapter or power charger is not plugged in.
Step 4: Press thePowerbutton and then hold it for 8-10 seconds.
Step 5: After a while, reconnect the AC adapter to the HP notebook.
Dont connect any peripheral devices, port replicators, or docking stations.
Step 6: Press thePowerbutton as you usually do to turn on the notebook.
For more information:Reset HP Laptop.
Method 5: Try Component Tests
Step 1: Press thePowerbutton.
Step 2: Keep pressingEscon your keyboard until a menu appears.
Step 3: Then, press theF2key and selectComponent Tests.
Running component tests can identify what problems cause your system cant turn on and fix it.
Step 2: ChooseTroubleshooton the Choose an option window.
Step 3: SelectReset This PCon the Troubleshoot screen.
Method 7: Boot in Safe Mode
Step 1: SelectTroubleshooton Choose an option window.
Step 2: Navigate toAdvanced options > Startup configs.
Step 3: SelectEnable Safe Mode / Enable Safe Mode with Networkingwith your keyboard.
Step 4: When finishing the troubleshooting, clickStartto exit Safe Mode.
Step 5: ClickPowerandRestartto power cycle your gear.
Step 2: PressEscorF10to enter the BIOS controls menu.
Step 3: pick the restore to default option and pressEnter.
Step 4: ExitBIOSand reset your laptop.
Step 2: Press and hold theWindows + Bkeys simultaneously.
Step 3: While performing step 2, kindly press and hold thePowerbutton for 1 second.
Step 4: Release all the keys and the power light should back on.
Step 5: The laptop screen will remain blank for about 40 seconds.
You may also hear the beep sounds.
Step 6: TheHP BIOS Updatescreen will appear and the updating process will begin.
Why is the Caps Lock button blinking?
How can you resolve this problem?
Here are three basic methods to help you.
We suggest you back up your data to avoid unexpected loss.
MiniTool ShadowMaker also offers a safe disk clone for you to upgrade the hard drive without OS reinstallation.
Step 1: Download and installMiniTool ShadowMaker.
Step 3: Click theBackuptab on the left penal.
Then clickOKto back to this interface.
Step 5: ClickDESTINATIONto choose the place you want to back up, then clickOK.
Step 6: After going back to the Backup window, click theBack Up Nowbutton to start the process.
you might use it to recover data with these steps.
Step 1: PressWindows + Sand typerestore filesin the search bar.
Step 2: SelectRestore your files with File History.
Step 3: Browse the list and view all its versions using the arrows.
Step 4: grab the file you need and click Restore.
This will restore the file to its original location.
Step 5: you might also right-click onRestoreand selectRestore toto choose a new location for it.
HereMiniTool Power Data Recoveryshould be mentioned.
This helps reduce scanning time.
The following part gives detailed instructions to help you recover data with it.
Step 1: Download and Install MiniTool Power Data Recovery.
Step 3: Choose a partition and click theScanbutton.
Step 4: Wait until the scanning process ends, and snag the files you want to recover.
Step 5: press theSavebutton and choose the right save path to restore files.
The following content will show you how to get them back from devices in different situations.
it’s possible for you to select a suitable edition that contains a snap-in WinPE Bootable Builder throughthe page.
If youre a personal user, the Personal Ultimate edition is the most economical choice.
Step 1: Create a bootable disc.
1.Download MiniTool Power Data Recovery on a well-performing computer.
3.Register with your license key by clicking thekey icon.
4.select theBootable Mediabutton again, then follow the on-screen instructions tocreate a bootable USB flash drive.
5.Remove the bootable disc properly from the current computer.
Step 2: Change the boot order on the HP laptop.
Step 3: Recover data from a non-bootable HP laptop.
After that, you should wrap up the software and change the boot order back.
Conclusion
Dont be freaked out when finding your HP laptop wont turn on.
This page introduces the possible reasons for this problem and the useful solutions to solving it.
Any questions are welcome to discuss via[email protected].
