Error code 0xc000000e is a common blue screen error when booting the system from the cloned drive.
It indicates the system fails to load the critical boot files.
In detail, a blue screen displays the message:
Your PC needs to be repaired.
A required equipment isnt connected or cant be accessed.
Error code: 0xc000000e.
This is because Windows determines the boot priority depending on the connected devices.
Boot issues may happen once peripherals take precedence over your system drive.
In this case, disconnect your unnecessary external devices:
Step 1: Shut down your setup.
Only connect the essential keyboard and mouse, and see to it the connection is secure.
Step 3: Turn on the PC and test whether you still meet the error code 0xc000000e after clone.
What if there is no audio after cloning HDD to SSD?
Fret not, you will figure out some useful solutions from this post to help you out.
By resetting, all the incompatible configurations will be removed.
Note that the boot key can be Del, Esc, F2, F10, etc.
2 ways with steps on how to access BIOS on Windows 10/8/7 are provided.
Step 2: Find the setup defaults option in BIOS.
Step 3: Select it and pressEnterto begin resetting BIOS to default prefs.
Step 5: Save the changes and proceed.
You wont face error code 0xc000000e after clone.
Hence, give it a try by taking these steps.
Repeat this three times and the operating system will enter theAutomatic Repairscreen.
Just hitAdvanced optionsto accessWindows Recovery Environment(WinRE).
This post shows you how to open Advanced Startup Options on your Windows 11 computer using different methods.
Step 2: Move toTroubleshoot > Advanced options > Startup Repair.
Step 3: This tool will diagnose your system and it will start up if issues are fixed.
If not, continue the following troubleshooting tips.
To tackle this issue, repair the BCD file.
Step 2: Head toTroubleshoot > Advanced options > Command Prompt.
Step 3: In the CMD window, jot down the following commands in order and pressEnterafter each command.
What is BCD file?
When do you’re gonna wanna rebuild, backup, or restore it?
In this guide, you might get all the answers you want.
Want to share them with others to help them out?
nudge the Twitter button below for this task.
As a result, you meet the error 0xc000000e when booting from cloned drive.
so that do a successful cloning task, use the professional hard drive cloning software MiniTool ShadowMaker.
Bycloning HDD to SSDwith this utility, you easily upgrade your disk.
Moreover, MiniTool ShadowMaker enables you toclone SSD to larger SSDand move Windows to another drive without any effort.
Then, double-tap on the icon of this software to launch it and then hitKeep Trial.
Step 2: On theToolspage, locate and clickClone Disk.
By default, MiniTool ShadowMaker uses a new disk ID for the target drive to preventdisk signature collision.
You had better not change it if you keep both the source and target disks.
Just do it with a license key and then the cloning process begins.
Depending on the data size, the cloning time you take varies, and wait patiently.
ItsMigrate OS to SSD/HD WizardandCopy Disk Wizardfeatures are worth a shot.
Download, install, and launch it to get started, then complete the cloning task.
For more information onhow to clone a hard drive, tap the given link.
MiniTool Partition Wizard FreeClick to Download100%Clean & Safe
Once done, your cloned SSD should be bootable.
You wont meet the blue screen error 0xc000000e.
If you run into the case cloned drive wont boot Windows 11/10/8/7, how to fix it?
This post shows you multiple fixes to help you out.
Apply them, without spending much time and effort to seek solutions in the event of issues.
Final Words
Thats information on the topic of error code 0xc000000e after clone.
This tutorial covers several solutions and try them until you get rid of trouble.
Do you have any idea about our MiniTool software?
If yes, dont hesitate to contact us by sending an email to[email protected].
Thanks for your feedback to help us make progress.
