Encounter Stop Code: DRIVER PNP WATCHDOG? Try These Methods

If you are experiencing the DRIVER PNP WATCHDOG BSOD error, dont be panic.

It is not hard to fix at all.

it’s possible for you to refer to this post offered byMiniTool Solutionto get some effective methods.

The DRIVER PNP WATCHDOG BSOD Error

DRIVER PNP WATCHDOG is one of theBSODerrors.

The DRIVER PNP WATCHDOG error is a system issue.

What causes DRIVER PNP WATCHDOG error?

There are many reasons for this error.

You will be unable to install main upgrades when the DRIVER PNP WATCHDOG error comes.

Thus, how to fix DRIVER PNP WATCHDOG?

The following part will show you different methods to easily solve this error.

Step 1: Press theWinkey +Rkey together to open theRundialog box.

Next, typeservices.mscand pressEnterto open theServiceswindow.

Step 2: Find theVolume Shadow Copyservice in the list.

Double-click it to open itsPropertieswindow.

Step 3: SetStartup typetoAutomaticand setService statusset toRunning.

Then clickApplyand thenOKto stash your changes.

Step 4: power cycle your gear.

Now, see if the problem has been solved.

Thus, you should run a full system scan for viruses and malware so as to remove them.

Here are the steps on how to do that with Windows Defender.

Troubled by Windows Defender not turning on?

Here are full solutions to repair Windows Defender in Windows 11/10/8/7 and the best way for PC protection.

Step 1: Press theWinkey +Ikey to open theWindows Settingswindow.

Step 2: ClickUpdate & Securityand click theWindows Defenderoption from the left side.

Step 3: Click theOpen Windows Defender Security Centerbutton from the right side.

Step 4: In the pop-up window, clickVirus & threat protection.

Step 5: ClickAdvanced scannext to theQuick scanbutton.

Step 6: CheckFull scanand then clickScan now.

Windows Defender will start to scan your system and report any findings to you.

Next, verify if the Stop code: DRIVER PNP WATCHDOG error has left your PC.

If any of service is faulty, the DRIVER PNP WATCHDOG BSOD error may occur.

Step 1: Typecmdin theSearchbar, right-clickCommand Promptand chooseRun as administrator.

When theUser Account Controlwindow pops up, clickYes.

Step 4: Now, navigate toLocal Disk (C:)\Windows\System32\catroot2.

Step 7: Right-click theStartmenu and then chooseWindows PowerShell (Admin)to open it.

Step 8: key in the command:wuauclt.exe /updatenowand pressEnter.

After that, restart the system and peek if the DRIVER PNP WATCHDOG error has gone.

If not, move down to the next method.

Finally, the DRIVER PNP WATCHDOG error appears.

Thus, you should runSFCto repair your Windows registry.

The following part will show you how to run an SFC scan on Windows 10.

Step 1: Typecmdin theSearchbar, right-clickCommand Promptand selectRun as administrator.

When theUser Account Controlwindow pops up, clickYes.

Step 2: Input this command:sfc /scannowand pressEnterto run it.

Step 3: Wait for the scanning process to complete, and then cycle your PC.

All corrupted files will be replaced.

Now look to see if the DRIVER PNP WATCHDOG error has been fixed.

If not, move down to the next method below.

Is Windows Automatic Repair not working?

Step 1: Insert your Windows bootable installation DVD and then cycle your PC.

Step 2: Press a certain key (depending on the brand of your box) to access BIOS.

Step 3: Set the DVD as the first boot unit so as to boot your machine from DVD.

Step 4: Select your language and other preferences, and clickNext.

Step 5: Now, clickRepair your system.

Step 6: ClickTroubleshoot > Automatic Repairand choose your target operating system.

Then, wait for the Windows Automatic Repair to be complete.

Step 7: reboot your PC.

test whether you are still encountering the same problem.

Laptop stuck on Preparing Automatic Repair during startup?

Read this post and find out how to effectively solve this issue.

Now venture to spin up the Windows Updates troubleshooter to deal with this the DRIVER PNP WATCHDOG error.

Step 2: ClickUpdate & Securityand click theTroubleshootoption from the left side.

Step 3: FindWindows Updatein the list on the right.

Click it, clickRun the troubleshooter.

reboot your PC and find out if the DRIVER PNP WATCHDOG error has been resolved.

In this way, all of your services, drivers and apps will be uninstalled.

Meanwhile, all the changes you have made to your system prefs and preferences will be cleared.

Now, lets start to reset your PC with the following instructions.

Step 2: ClickUpdate & Securityand click theRecoveryoption from the left side.

Step 3: ClickGet startedunderReset this PC.

Step 4: ChooseKeep my filesorRemove everything.

Take the latter as an example.

Step 5: ChooseOnly the drive where Windows is installedorAll drives.

Step 6: ChooseJust remove my filesorRemove files and clean the drive.

Step 7: ClickResetin theReady to reset this PCwindow.

Step 8: Wait for the process to complete.

I was so frustrated when the DRIVER PNP WATCHDOG BSOD error occurred on my computer.

Right now, here is a useful suggestion for you.

To avoid something wrong with your system in the future, you had better create a system image.

A piece offree backup software MiniTool ShadowMaker will be your good assistant.

It is compatible with Windows 7/8/10.

Its functionality is more than this.

If you have a need, you’ve got the option to free download MiniTool ShadowMaker Trial now.

you’ve got the option to use the Trial Edition for 30 days for all backup features.

If you want to use MiniTool ShadowMaker permanently, upgrade this freeware to itsPro Editionby clicking this link.

Step 1: Choose a Backup Mode

1.Launch MiniTool ShadowMaker.

2.ClickKeep Trailto use the Trial Edition.

3.Then clickConnectin theLocalsection to manage the local computer.

Thus, you dont need to choose them again.

Optional: If you want to choose another backup source, you are allowed to do so.

Step 3: Select a Destination Path to keep your System Image

1.Click theDestinationtab in theBackuppage.

2.There are four available destination paths.

Select a suitable destination path and then clickOK.

it’s advisable to select an external hard drive as your destination path.

Step 4: Start to Back up

1.ClickBack up Nowto start this backup task immediately.

2.ClickYesto confirm to perform the backup operation right now.

This post offers a powerful backup program- MiniTool ShadowMaker to back up my system.

Besides, hope you have successfully made a backup with our powerful backup program MiniTool ShadowMaker.