The followingexternal hard drive freezes computersituation fromreddit.comis big trouble for most of you.

This user thinks the externalhard drive recovery costis high and he cant afford it.

If you experience this issue, you may also want to recover data at the lowest cost.

external hard drive freezes computer case in reddit

When the issue mentioned in this post happens, you will be unable to use your Windows as usual.

How to use this software to recover data from an external hard drive?

We will make a step-by-step guide in the following part.

click on bootable media button on the software interface

Then, you’re free to launch the software to enter the software interface.

On the left bottom of the interface, you could see aBootable Mediabutton on the top menu.

you better choose it to continue.

select the media type to start the building process

Step 2: This software will pop out a small window as follows.

you oughta hit theWinPE-based media with MiniTool plug-inoption.

Step 3: Another window will appear.

choose media destination and click yes to start to create the boot disk

The connected USB flash disk will be detected and shown by this software.

it’s crucial that you select it and a window generates.

The message on the pop-out window will inform you that The data on the USB disk will be destroyed.

click finish button when the building a bootable usb disk process is finished

So, you should probably verify that there are no important files on it.

Then, you could choose theYesbutton to start the building process.

Step 4: When the building process is finished, you will see the following messages.

select the target partition to scan

just click onFinishbutton to quit this interface.

Now, the MiniTool PowerData Recovery Boot Diskis prepared.

Then, its time for you to use this boot disk to recover data from the external hard drive.

enter the scan result after the scanning process

Next, you gotta set your machine to access BIOS.

After that, you oughta set your setup to boot from the boot disk.

Then, you better pressF10button to save this setting and exit this interface.

use type find and filter functions to get your files quickly

Step 2: your gear will enter the following interface, and then launch MiniTool Power Data Recovery automatically.

Step 3: You will see the software interface.

All connected hard drives including internal hard drives and external hard drives will be displayed on this interface.

click on command console to enter command prompt

The drive letters under WinPE and the drive letters under Windows Explorer may be different.

Hover over the drive you want to recover data from and hit theScanbutton to start the scanning process.

Step 4: This software will take some minutes to finish the scanning process.

type diskpart and press enter

After that, you will enter the scan result interface.

And both deleted and existing files are shown on this interface.

On this interface, the scanned files are classified by the path.

type list disk and press enter

you could unfold each path to find the files you want to recover.

you might also click onTypetab to make this software show you the files in key in.

It can help you to find the target files quickly.

type select disk 1 and press enter

Step 5: After checking the files you want to recover, you gotta click onSavebutton.

Then, this software will pop out a window.

you could choose a proper path on the computer to save these selected files.

type clean and press enter

My WD passport freezes my computer.

Then, I use MiniTool Power Data Recovery Boot Disk to rescue its files easily.

you might also use the boot disk of this MiniTool data recovery software to format this external hard drive.

type create partition primary and press enter

So, you still need to use a full edition of this software to do this job.

Then, you will be back to theMiniTool PE Loaderscreen.

Click onCommand Consoleto continue.

type format fs=ntfs and press enter

Step 2: TheCommand Promptwindow will pop out.

c’mon typeDiskpartand pressEnterbutton.

Step 3: Then, it’s crucial that you typelist diskand pressEnter.

type assign to add a drive letter to the external hard drive

Now the drives connected to the computer will be listed on the window.

you’re able to identify them from their disk number and size.

Here, disk 1 is the target external hard drive.

Step 4: Now, you better typeselect disk 1and pressEnter.

This window will showDisk 1 is now the selected disk.

Step 5: Typecleanand pressEnter.

Then, DiskPart will clean all files and folders on disk 1.

So, it’s crucial that you typecreate partition primaryand pressEnter.

Step 7: You also need to format the partition with afile system.

It will take a long time to finish this formatting process.

So, hey typeassignand pressEnter.

Now, the external hard drive is formatted with a drive letter successfully.

you could shut down your setup and set the PC to boot from Windows again.

After that, you’ve got the option to check whether external hard drive freezes computer or not.

Power outage, forced shutdown of computer, and such behaviors often cause corrupted system files and drives.

To fix this issue, you’re free to try running SFC.

Click to Tweet

Bottom Line

External hard drive freezes computer when plugged in?

you’re able to try MiniTool Power Data Recovery Boot Disk to fix this issue.

Read this article to learn the skills.

If you have any useful solutions, you could also share with us.