The new RAM not detected?
In this post,MiniToolhas gathered multiple useful methods for you to deal with the RAM not detected error.
RAMis pretty critical for your desktop computers.
Then how to fix it?
The answer is shown below.
Therefore, you will meet the RAM not detected error.
So you should remove the DIMM and hit it one more time.
The design of laptops becomes a little tricky because of their low tolerance for space and volume.
But you should know that even a properly inserted DIMM may not be installed correctly.
verify to apply as much pressure as possible on the operating lever without damaging the circuit board itself.
Your motherboard has the maximum amount of supported RAM, including all slots on the motherboard.
The computer is running slower, and the possible reason is the lack of RAM.
This article briefly introduces how to clean RAM.
Here is the way to run it:
Step 1: Press theWinandRkeys together to open theRunbox.
Step 2: Entermdsched.exeand then clickOKto open theWindows Memory Diagnostic.
Step 3: ClickRestart now and check for problems (recommended).
After the process, it will show whether there is something wrong with your RAM.
Therefore, you should use a simple cotton swab to gently wipe each contact with 91% isopropyl alcohol.
(Do not use conventional cleaning contacts, because chemicals may cause corrosion.)
verify that alcohol is completely evaporated, and check the contacts for residual dust or cotton.
If you have some compressed air, quickly clean each side of the DIMM.
After these things have been done, reinsert it and hit it one more time.
you’re able to try the methods mentioned above to fix it.
