But luckily, this post offered byMiniTool Solutionhas gathered multiple efficient methods to fix the error.
So what will you do if you meet the BSOD 0x0000007B at Windows startup?
Keep reading, and then you might know how to fix error 0x0000007B.
Need to trigger a BSoD screen on your gear?
Here is how to force a Blue Screen of Death on Windows 11/10 using 3 different ways.
What Causes the BSOD 0x0000007B?
The STOP 0x0000007B error often occurs onBlue Screen of Death.
So what causes the BSOD 0x0000007B?
How to Fix the BSOD 0x0000007B?
Therefore, restarting your setup may help you to get rid of the error.
Sometimes, the error 0x0000007B may be just a fluke so that your rig failed to boot correctly.
Thus, you give the chance to your PC to boot correctly by rebooting your PC.
But if this doesnt work, then you’re free to try the following methods.
Step 2: Repeatedly pressF8(or another button/button combination) as soon as the logo disappears.
Step 3: Choose theLast Known Good Configuration (advanced)option in theAdvanced Boot Optionswindow.
Step 4: PressEnterand wait for the process to complete.
After you have booted your machine to Last Known Good Configuration, then the 0x0000007B error should be fixed.
And you should see to it that your antivirus software is up to date.
Step 2: Run a complete virus scan on your entire computer.
And if there is any virus on your setup, remove them using your third-party antivirus tool.
Step 3: kickstart your rig to peek if the error 0x0000007B disappears.
Here is the tutorial:
Step 1: Boot your gear into Safe Mode.
Typecmdin theSearchbar and then right-clickCommand Promptto chooseRun as administrator.
Step 2: Typesfc /scannowin the popped up window and then press theEnterkey.
Step 2: Typechkdsk c: /rin the window and then press theEnterkey.
(c is the letter of the drive where you back up your system).
After entering BIOS, you should change the option from AHCI Mode to IDR Mode or vice versa.
After changing the hard disk controller option, the 0x0000007B error should disappear.
The problem of system restore did not complete successfully may be because of different reason.
This article shows you how to solve Windows 10 restore failed.
Hence, if you meet the stop code, what you should do is to fix the MBR.
Then how to fix the MBR?
Simple instructions are here.
Step 1: Boot your rig toWindows RE, and then navigate toTroubleshoot>Advanced options>Command Prompt.
And if this method still cannot solve the problem, then you should try the following methods.
Here is the tutorial:
Step 1: Boot your machine to Windows RE, clickTroubleshootand then clickAdvanced options.
Step 2: On the Advanced options screen, clickAutomatic RepairorStart-up Repair.
Step 3: Let the process finish and then reboot your machine to peek if the error is fixed.
Is Windows Automatic Repair not working?
Therefore, backing up your important data is very necessary before you adopt this method.
Back up Your Important Files
How to back up data quickly and safely?
You should use MiniTool ShadowMaker to do it.
It is a piece of effective and professionalbackup and restore software.
And it is easy to restore backup image files using theRestorefeature.
In addition to theBackupfeature, theSyncfeature is also very convenient when you want tosync files and foldersto different locations.
And theClone Diskcan help you tomake a bootable external hard drive.
Step 2: ChooseConnectunderThis Computerto enter the main interface.
Step 3: Go to theToolspage, and then clickMedia Buildertocreate bootable media.
Step 4: Use the bootable media to launch your rig, and then go to theBackuppage.
Step 5: ClickSourceand then selectFolders and Files.
Check all the files and folders that you need and then clickOK.
Step 6: ClickDestinationand then choose the external hard drive as a destination to save the backup image.
you should probably start the task on theManagepage if you clickBack up Later.
Step 8: Wait for MiniTool ShadowMaker to finish backing up files and folders.
Step 3: ClickInstall Nowand then follow the onscreen instructions to perform a clean installation.
After you reinstall your system, the 0x0000007B should have disappeared.
