You must insert a memory or SD card in your dash cam to save the recordings.
Your dash cam may accidentally say that the memory card is full one day.
How to fix this problem?
In this post,MiniTool Softwarewill introduce some useful methods.
With MiniTool data recovery, SD card recovery is no longer difficult.
So, youd better not manually delete videos to guarantee its normal running.
But to avoid the dash cam memory card full issue, you could shorten the loop recording time.
For example, you’re able to set the loop record time from 3-5 minutes to 1-3 minutes.
you might change the sensitivity under G Sensor Setting.
This can repair the card in case it is damaged or corrupt.
Step 2: Download and install this MiniTool data recovery software on your PC.
Then, launch it to enter its main interface.
Step 3: The card will be displayed under Logical Drives.
Then, hover over the card and click theScanbutton to start scanning that drive.
you might initiate the paths to find your needed recordings.
Step 5: choose the files you want to recover.
you might select all your needed files from different paths at the same time.
Then, click theSavebutton and select a suitable location to save these recordings.
it’s possible for you to select a suitable edition from MiniTools official store.
Seehow to choose the best card for your dash cam.
The fixes in this post should help you solve the problem.
Besides, when you want to recover data from card, you could just try MiniTool Power Data Recovery.
