What Is Dell Error Code 2000-0141?
These codes can help manufacturers and technicians to identify and solve issues.
Msg: Error Cod 2000-0141
Msg: Hard Drive no drive detected
… when starting the PC.
This error means that your PC cannot detect the hard drive.
No hard drive means no operating system, and you cannot use your system.
What are the common reasons for Dell error code 2000-0141?
Lets move to the next part to know how to fix Dell error code 0141.
If your hardware goes wrong, this diagnostic tool will show you error messages like 2000-0141.
Then, the machine will enter theEnhanced Pre-boot System Assessmentwindow.
Then, the system will enter the diagnostic mode.
Next, start a scan.
After that, Dell error code 2000-0141 may disappear.
Or else, it’s crucial that you try another fix.
The connection may be disconnected due to loose or damaged SATA/IDE cables.
Just go to check these cables on your PC.
Proper equipment like a right screwdriver and antistatic band is required to disassemble a computer.
After that, check the connection.
Next, boot up your Dell PC and see if error code 2000-0141 still persists.
If yes, continue the fix in the following methods.
It stores the Basic Input/Output System (BIOS) parameters.
BIOS, a firmware embedded on the chip, can help to initialize and test the system hardware components.
After a few seconds, connect the battery and then BIOS will be reset to its default parameters.
Next, boot up your Dell computer to see if code 0141 is fixed.
Focus on 2 Ways.
To do this task, you gotta create a Linux live USB drive.
This will take some time to download the file and wait patiently.
Step 2: Download Rufus and open it.
Step 5: bring up the file manager and access your hard drive.
Then, execute the CHKDSK scan or format the drive and reinstall Windows.
All these contents can be compressed to an image file, which saves much disk space.
Besides, you could sync folders & files on your hard drive to another location for backup.
Furthering more, hard drive cloning is supported.
If you want to make a disk backup, cloning is also a good option.
Since the Dell PC is unbootable, it’s crucial that you use MiniTool ShadowMaker Bootable Edition.
Step 1: Free download MiniTool ShadowMaker Trial Edition by clicking the button below.
Step 5: Open MiniTool ShadowMaker Bootable Edition.
Step 6: ClickDestinationto choose an external hard drive to store the backup.
Step 7: ClickBack up Nowto start the backup task at once.
In addition, you’re free to use theSyncfeature to back up the data you need.
This wont require image recovery for access.
PC is not booting but you want to back up files without booting to save them?
This post will show you how to back up data from a computer that wont boot.
If your hard drive is not accessible, you’ve got the option to also achieve this aim.
There is a chance that hard drive failure happens when the error code 2000-0141 occurs.
Well then, how to recover files from your problematic Dell PC?
This is not a difficult thing and a professional tool is required.
Here, we strongly recommend using MiniTool Power Data Recovery.
When meeting error code 2000-0141 Dell, this program can be a good assistant.
After that, boot the PC from that drive to enter the main interface ofMiniTool Data Recovery Bootable Edition.
Then, start the recovery operation.
Step 1: After opening this data recovery software, choose the hard drive from theDevicestab and click theScanbutton.
Step 2: The scan will take some time.
To see to it you have a good recovery result, dont stop the scan.
you should save data to an external hard drive.
Or take your Dell PC to a repair shop to ask for help.
Good luck to you.
If you are plagued by this issue, make a run at fix it using the given methods above.
We will reply to you as soon as possible.
