Motherboard no post, no beep, or no display is a common issue on your gear.
If you are bothered by the issue of no post beep on startup, what should you do?
If POST finds everything is OK, the Windows operating system will load successfully.
Each error has its beep code that may be different from BIOS to BIOS.
If you hear one or two long beeps, this means POST is working.
If no beep appears and the system fails to load, POST isnt working.
Well then, what should you do if there is no post beep?
Computer wont post when you turn it on?
Dont worry and you could follow these methods in this post to easily get rid of PC not posting.
If one or more cables are damaged, the situation may happen your rig wont post no beeps.
Besides, see to it all the wires are connected correctly or the connections are firm.
Then, venture to restart the PC to let it boot.
Next, connect your equipment one by one to identify the defective equipment.
Check Power Supply Unit
Sometimes power supply issues can lead to the issue of no post beep.
Go to check the power cords and PSU to see if they work as normal.
If not, put the RAM stick to another slot and start the computer.
You should double-check the CPU function well and you remove the plastic guard correctly.
Besides, you should look to see if the CPU fan can work properly.
Clear CMOS
Clearing CMOS can reset BIOS to its default options.
Or, you’re free to go to follow methods in this related article How to Clear CMOS?
Focus on 2 Way.
After that, boot your PC and it may boot successfully.
you’re free to only send the PC to a repair shop to ask for help.
Go to the next part to know how to keep PC data safe.
But fortunately, you could do it with a professionaldata backup software.
Here, we recommend using MiniTool ShadowMaker.
Incremental backup, differential backup, andautomatic backupare also supported.
Although the computer wont post no beeps, it’s possible for you to keep the data safe.
Besides, prepare a hard drive or USB flash drive to save the backed-up files.
Step 2: In MiniTool Recovery Environment, launch MiniTool ShadowMaker.
Step 5: ClickSync Nowto execute the task.
After that, it’s possible for you to go toManageand clickLocateto the location where your data is saved.
It supports USB flash drives, SSDs, HDDs, SD cards, etc.
To do this work, you oughta use a full edition by getting it viaMiniTool Store.
Then, create a bootable drive or disc to get MiniTool Power Data Recovery Bootable Edition.
Step 2: In the recovery environment, clickMiniTool Power Data Recoveryto launch this software.
Step 3: In the main interface, clickDevicesand you might see all your drives.
Choose the system hard drive and clickScan.
Step 4: MiniTool Power Data Recovery will start a scan for the entire disk.
The scan time is determined by the data size of that hard drive.
You had better not stop the scanning process since this can impact the scan result.
Step 6: Click theBrowsebutton to choose another hard drive to store the recovered data.
Related Issues FAQ
PC system issues are common and the situations are various.
In this post, we show you the case no post, no beep.
Sometimes, the PC can turn on but no display.
If you find there is no input on your monitor, what should you do?
Here is a related article for you and refer to it to look for solutions Dont Panic!
8 Solutions to Fix PC Turns On but No Display.
Sometimes your setup powers on but no BIOS.
If you are bothered by this situation, how to get rid of the trouble?
Go to try solutions in this guide What If your rig Cant Access BIOS?
A Guide for You.
These prevent the system from loading.
if you bump into one, search for solutions online based on the specific error alert.
Bottom Line
Computer wont post no beeps?
How to fix this issue?
Or, you’ve got the option to leave your ideas in the comment part below.
We will reply to you as soon as possible.
