It is really annoying to encounter PC stuck on ASRock screen when trying to boot your system.
How to fix it to boot your setup without errors again?
After reading this guide fromMiniTool Solution, you will get around this tricky issue easily.
Heres how to rule out the problematic peripherals:
Step 1.
Press and hold thePowerbutton until your rig shuts down.
Disconnect all the peripherals from your Windows machine.
you’re able to connect the peripherals one by one to exclude the conflicted unit.
The BIOS can be used for identifying and configuring hardware in your system.
To do so:
Step 1.
Shut down your setup and disconnect the system power cord from its AC power source.
Step 2. fire up the case cover of your setup.
Find the CMOS battery on the motherboard and pry it from the connector gently.
After several minutes, reinsert the CMOS battery and then put the computer case cover back.
Therefore, you need toenter the BIOS menuto see if your default boot rig is right.
Heres how to do it:
Step 1.
Shut down your setup and then restart it.
PressF2orDelrepeatedly when the system starts.
Step 4. start your setup.
Heres how to check your RAMs:
Step 1.
Power off your setup.
Locate RAMs on the motherboard and remove them from the slots.
Insert one RAM at one time while trying to boot each time.
If any RAM modules or RAM slots are faulty, you should probably replace them in time.
RAM is an important factor to affect your computers performance.
Is it necessary to upgrade RAM?
How to upgrade it?
Heres how to do it:
Step 1.
Repeat the process for 2 or more times until prompted by theAutomatic Repairscreen.
Click onAdvanced optionsto enterWindows Recovery Environment.
Navigate toTroubleshoot>Advanced options>Startup Repair.
Fix 6: Reset This PC
MiniTool ShadowMaker TrialClick to Download100%Clean & Safe
Step 1.
Boot your gear into Windows Recovery Environment.
Tap onTroubleshootand then hitReset this PC.
Either selectKeep my filesorRemove everything.
Obviously, it will take much time to troubleshoot this problem because you dont know the root cause.
Is there a better way to deal with the similar boot or system issue?
The answer is definitely yes.
you’re able to back up your operating system in advance.
To do so, MiniTool ShadowMaker is a good option.
This freePC backup softwaresupportsfile backup, system backup, disk backup, partition backup, and disk backup.
Heres how to perform one-click system backup with it:
Step 1.
Launch MiniTool ShadowMaker and go to theBackuppage.
Click onBack Up Nowto start the process immediately.
After creating a system image, you might go toMedia Builderin theToolspage tocreate a bootable USB drive.
PC is not booting but you want to back up files without booting to save them?
This post will show you how to back up data from a computer that wont boot.
For more quires about our product, welcome to share them with us via[email protected].
We are looking forward to receiving your feedback!
