AMD OverDrive is a software utility from the CPU manufacturer that helps you with overclocking and fan control.

However, some people encounter AODDriver2.sys error when using this software.

This post fromMiniToolprovides you with multiple solutions to fix the error.

What Is Ftdibus.sys? How to Fix the Ftdibus.sys Issue on Win11?

However, any conflict with AMD OverDrive software can cause Aoddriver2.sys error in Windows PC.

AODDriver2.sys is a Windows driver that allows the computer to communicate with hardware or connected devices.

In addition, AODDriver2.sys error makes your rig extremely difficult to restart and diagnose because of the frequent shutdowns.

navigate to the Programs and Features section

What causes the AODDriver2.sys blue screen error?

Here are the most common AODDriver2.sys error messages as follows.

SYSTEM_SERVICE_EXCEPTION AODDriver2.SYS

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED AODDriver2.SYS

What is ftdibus.sys?

input command to scan the system files

How to fix the memory integrity cannot be turned on due to ftdibus.sys issue on Windows 11?

Here are the answers for you.

In this next part, I will introduce how to fix the AODDriver2.sys error on Windows.

choose Open System Restore

How to Fix the AODDriver2.sys BSOD Error

There are multiple solutions to this error.

Thus, if your PC can boot, go to case 1.

If cannot, go to case 2.

Choose the time to restore your computer to the state it was in the selected event

Step 2:Navigate to thePrograms and Featuressection and click it.

Step 3:Find AMD OverDrive in the list and right-click it to chooseUninstall/Change.

After the uninstallation is complete, restart the PC and peek if the issue has been fixed.

confirm restore point and click Finish

Sometimes, AODDriver2.sys BSOD is triggered by the corrupted Windows system files.

Here are the steps to fix it:

Step 1:Inputcommand promptin the Search box.

Then right-clickCommand Promptand selectRun as administratorto initiate the command window.

How to Create a System Restore Point Windows 10? A Detailed Tutorial

Step 2:pop in the commandsfc /scannowand then pressEnter.

Wait patiently until the verification process 100% completes.

Then reboot the computer to see whether the AODDriver2.sys error still exists.

Fix the “An Operating System Wasn’t Found” Issue on Windows 11/10

So, bang out the correct command.

This may help you fix the AODDriver2.sys error.

Step 1:Search forcontrol panelin theSearchbox, then open it.

choose System Image Recovery in Advanced options

Step 2:ClickRecoveryto continue.

ChooseOpen System Restorein the pop-up interface to continue.

Step 3:In theRestore system files and settingsinterface, you could clickNextto continue.

Solutions to the System Image Restore Failed (3 Common Cases)

Step 5:it’s crucial that you confirm the restore point and clickFinish.

When the system restore process is finished, you could reverse your system to a previous state.

Then you’re able to test whether the error has gone.

Reset this PC

Then you could start to fix the error.

Safe Mode is a built-in diagnostic mode of Windows 10 (7, 8, etc.)

This post introduces how to fix the An operating system wasn’t found.

choose this computer to manage and enter the main interface

Try disconnecting any drives that don’t contain an operating system.

you could also use Windows 10 recovery bootable media like a DVD/USB bootable drive to enter WinRE.

Step 2:Enter the BIOS.

select the drive you want to store the disk image

Step 4:ClickRepair your computerto enter into WinRE successfully.

Now, you’ve got the option to continue to enter Safe Mode.

Step 1:From theChoose an optionscreen, click theTroubleshootoption.

click Back up Now or Back up Later

Next, clickAdvanced Options.

Step 2:Click theStartup Settingsoption.

Step 3: Click theRestartbutton.

Step 4:Then you will see multiple options for startup.

Press theF4key to enable Safe Mode.

Now your PC will restart in Safe Mode.

Step 1:Go toControl Panel>Programs and Features.

Step 2:Find and uninstall theAMD OverDrivesoftware.

Step 3:Get out of the Safe Mode and power cycle your PC.

Here is how to do that:

Step 1:Enter WinRE.

Step 2:You should chooseTroubleshootinChoose an option, and then chooseAdvanced options.

Step 3:ChooseSystem Image RecoveryinAdvanced optionsto get a new window.

Step 4:Choose the latest system image and then clickNext.

Receive the system image restore failed glitch notice in Windows 10?

This post shows you full solutions to fix it on 3 common cases.

This is more like a refresh of the system than reinstalling.

Step 1:Enter the WinRE.

Then go toChoose an option>Troubleshoot>Reset this PC.

Step 2:ChooseKeep my filesand continue with the resetting process.

Here are some effective solutions to AODDriver2.sys blue screen.

In case of something wrong with your system, it’s advisable to back up your system in advance.

Now, I will introduce a piece offree backup softwarefor you MiniTool ShadowMaker.

MiniTool ShadowMaker provides a one-click system backup solution.

The system backup is bootable.

When the system crashes, you’re free to restore your machine to a normal state.

MiniTool ShadowMaker provides a Trial edition that gives you a 30-day free trial for all backup features.

you’re free to purchase itsPro Editionto use it permanently.

Now you’ve got the option to download MiniTool ShadowMaker Trial Edition to back up your system.

MiniTool ShadowMaker can help you back up system to protect your data.