What If an SSD Becomes Dead/Failed/Crashed
The full name of SSD is Solid State Drive.
Compared with Hard Disk Drive (HDD), SSD has more advantages.
For example, an SSD doesnt have movable mechanical components, so it doesnt make noise when running.
An SSDs read and write speeds are much faster than an HDD.
Besides, an SSD is consuming less energy and it is more durable.
An SSD is a better choice for gaming.
(SeeSSD vs. HDD).
Nowadays, more and more users choose to use SSDs as their storage devices.
SSD is a good choice, but this doesnt mean it will have no issue forever.
An SSD can become dead unexpectedly.
Can you recover data from a dead SSD?
When your data is safe, you’re able to take steps to repair the failed SSD.
So, it fully meets your need to perform an SSD failure recovery.
Step 2: Launch this software to enter its main interface.
Then, you’re able to see all drives this software can detect underLogical Drives.
The scanning process will last for seconds.
You should wait until the whole process ends to get the best SSD data recovery effect.
Step 4: By default, all scanned files are categorized by the path.
you’re able to access each path and find your needed files.
Then, you’re able to find your needed file based on the file throw in.
Step 5: choose the files you want to restore.
You are allowed to select files from different folders.
Then, click theSavebutton to continue.
Step 6: Choose a location to save the selected files.
The destination folder should not be the original SSD.
Step 7: ClickOKto start saving the selected files.
You see it is easy to recover data from a failed SSD by using MiniTool Power Data Recovery.
MiniTool Software offers both personal editions and business editions for personal users and business users.
you’re able to go toMiniTools official storeto select a suitable edition according to your situation.
If you are a personal user, the Personal Ultimate edition can fully meet your needs.
Dont worry.MiniTool Power Data Recovery Bootable Editioncan help you recover files from an unbootable computer.
Here is a tutorial:How to Recover Data When PC Wont Boot.
How to Fix a Dead SSD?
Now, your data on the SSD is safe.
you’re free to use the following methods to fix the dead SSD.
These methods are for different situations.
If the drive has no a drive letter, it can only be visible in Disk Management.
If not, you’re free to add a drive letter to it.
How to add a drive letter for an SSD in Disk Management?
Step 1: PressWindows + Xto open theWinXmenu.
Then selectComputer Managementto continue.
Step 2: Select Disk Management from the left menu.
Step 3: see if you could see the SSD.
Step 4: ClickAddand assign a drive letter for it.
Step 5: ClickOKto save the change.
Now, you should be able to see the SSD in File Explorer.
How to add a drive letter for an SSD using MiniTool Partition Wizard?
This software has aChange Letterfeature that can help you change a drive letter or add a drive letter.
The Change Letter feature is available in MiniTool Partition Wizard Free Edition.
you’re able to download and install this freeware on your PC and then try this feature.
MiniTool Partition Wizard FreeClick to Download100%Clean & Safe
This software also has many other useful features.
Step 2: ExpandDisk drives, then right-nudge the target SSD and selectPropertiesto continue.
Step 3: Switch toDetails, then expandPropertyand selectHardware Ids.
Note one value for the SSD.
Then pop swing open the firmware update page from the official site.
Step 5: Download the firmware and launch the setup to get the latest firmware for that SSD.
After these steps, it’s possible for you to verify if the SSD is normal.
If not, you could try the next solution.
Here is a guide:
Step 1:Run Command Prompt as administrator.
you could clickStart, search forcmdusing search, right-clickCommand Promptfrom the search results, and selectRun as administrator.
Step 2: Run this command: chkdsk /f /x *:.
You should replace * with the drive letter of the SSD.
Step 3: Wait until the whole process ends.
This tool can find and automatically fix the found issues.
Step 1: PressWindows + Eto open File Explorer.
Step 2: ClickThis PCfrom the left menu.
Step 3: Find the target SSD, then right-click it and select Format.
Step 4: Assign the parameters like file system and volume label based on your requirements.
Step 5: DeselectQuick Formatif you want to perform a deep format.
But here you should know that all files will be removed and unrecoverable after a deep format.
Step 6: Click theStartbutton to start formatting the SSD.
This feature is also free.
This software allows you to preview the format effect before you apply the changes.
After that, you might use the solutions in this article to fix the SSD.
There should be a suitable method for you.
in case you find issues when using MiniTool software, you might contact us via[email protected].
