During the startup of the Windows operating system, ablue screenor black screen appears along with an error alert.
Today, we will discuss a Windows 7 black screen error Windows error recovery.
A recent hardware or software change might be the cause, as shown below.
Sometimes, you get another interface of Windows error recovery with different options.
When you come across the issue, how can you fix it?
So, you might follow the suggestions of Windows.
If these simple tips couldnt help, some other solutions are described here.
What is Microsoft Error Lookup Tool?
How to download Microsoft Error Lookup Tool and use it on your PC?
Find answers from this post now.
Sometimes this can let your Windows boot to the desktop normally.
Just have a try.
If this wont help, try other ways.
In this case, we strongly recommend removing recently added hardware.
Leave only the keyboard, monitor cable and mouse attached.
Step 3: Press and hold the power button for 5 seconds and release it.
Step 4: Put the battery back to the laptop and reconnect the power cord.
Step 5: Turn on the laptop and see if Windows error recovery still appears.
If yes, go to the next solution to troubleshoot.
you could boot your PC to this mode if you are having trouble starting the system normally.
that was working properly.
Step 1: cycle your setup.
Step 2: Repeatedly press theF8key until you see theAdvanced Boot Optionswindow.
Step 3: SelectLast Known Good Configuration (advanced)and pressEnter.
After the process finishes, your PC will boot to the desktop properly.
It can scan your system and attempt to fix damaged or missing system files.
Just use the arrow keys to highlight this option and pressEnteron your keyboard to run Startup Repair.
An installation disc is helpful.
How can you create bootable USB from ISO in Windows 10/11 for a clean install?
This post will show you the Windows 10 USB tool for ISO to USB.
Step 2: Insert this disc and reset your gear.
Note that you should change the BIOS tweaks so that the disc is the first boot order.
Step 3: Choose your language, keyboard, and time options, clickNext.
Step 4: In the pop-up window, clickRepair your rig.
Step 5: Choose your system to repair.
Step 6: You will get the following interface.
ClickStartup Repairto automatically fix problems that are stopping Windows from starting.
Then, the repair process starts.
This may take 15 to 45 minutes to complete, so wait patiently.
Also, it may require the system to restart.
If you cannot see it, go to Safe Mode by following these steps.
Step 1: Reboot your gear.
Step 2: PressF8to enter theAdvanced Boot Optionswindow.
Step 3: SelectSafe Mode with Command Promptby using the arrow keys.
Step 4: After the Command Prompt opens, typerstruiand pressEnterto open theSystem Restorewindow.
Step 5: Choose a restore point from the list and clickNext.
Step 6: ClickFinishand the restore process will start.
After that, the Windows error recovery issue should be fixed.
These two ways are described in the above contents.
Then, in CMD, throw in these commands and pressEnterafter each command.
After the process is finished, kickstart your rig and see if Windows error recovery is disappeared.
The last resort is reinstalling the operating system.
Back up Files
How can you back up files when Windows fails to boot?
Just get MiniTool ShadowMaker from the download button.
Step 2: ClickMedia Builderand follow the on-screen to finish the bootable drive creation.
Related articles:
Step 4: Launch MiniTool ShadowMaker and go to theBackuporSynctab.
Step 5: Choose files on the desktop as the backup source and select a destination.
Step 6: ClickBack up NoworSync Nowto execute the backup task.
PC is not booting but you want to back up files without booting to save them?
This post will show you how to back up data from a computer that wont boot.
Step 1: Boot your box from the installation disc that you have prepared.
Step 2: After choosing the language, time and keyboard, clickInstall nowto start the system reinstallation.
Step 3: Accept the license terms and chooseCustom (advanced).
Step 4: Decide where to install Windows and then the setup tool will start installing Windows.
Does Windows error recovery screen appear when booting up Windows 7?
Here are all the possible solutions to this problem.
To do this work, MiniTool ShadowMaker can be also helpful.
By default, system backup is selected.
Step 1: Launch MiniTool ShadowMaker.
Step 2: Go to theBackuppage, system-related partitions are selected and you might go toDestinationto choose a destination.
Step 3: Execute this backup task by clickingBack up Now.
Bottom Line
Are you bothered by Windows error recovery while you start up your Windows 7?
Now, try these solutions mentioned above and you might easily get out of the trouble.
Also, a suggestion is introduced.
Also, any questions during using MiniTool Software are also appreciated.
