Is Crucial SSD Not Booting After Cloning? Fix It Now!

However, they find that Crucial SSD not booting after cloning.

This post fromMiniTooloffers reasons and solutions.

You may have tried replacing your old HDD with an SSD since SSD has better performance and greater stability.

However, its common to encounter the cloned SSD fails to start issue on Windows 11/10/8/7.

Here, lets talk about the specific SSD brand cloning issue Crucial SSD not booting after cloning.

4.Driver issues:The new SSD may require different drivers that were not transferred during the cloning process.

5.Cloning issues:Other errors occur during the cloning process.

These errors may include corrupted files or incomplete data transfers.

Is your Acronis True Image for Crucial not working or not cloning?

This post analyzes the reasons and provides an alternative for you.

Now, lets move to the next part to find some effective workarounds.

Sometimes, incorrect connections or faulty cables can cause the system to not recognize the Crucial SSD properly.

Its recommended to use a reliable SATA cable instead of a USB cable.

Fix 2: Change the Boot Order in BIOS

1.

When the startup screen appears, press the BIOS key constantly toenter BIOS.

The key is different depending on your equipment brand and model, which can be Del/F1/F2/F8/F10/F12.

Next, go to theBIOStab.

PressF10to save and exit BIOS.

Then, reset your rig.

Using the wrong boot mode may cause the crucial MX500 SSD not booting after cloning issue.

Here is how to change it.

Enter BIOS via the steps in fix 2.

Go to theStorage Boot Option Controlpart.

Change the boot option toUEFI OnlyorLegacy Onlyand pressEnter.

How to check UEFI or Legacy on your Windows 7/10/11 PC?

you’re able to figure out 3 useful ways to help check the PC boot mode.

Typecmdin theSearchbox and chooseRun as administrator.

Then, punch in the following commands and pressEnterafter each one.

Prepare a bootable USB installation ready.

Then, you should probably boot the PC from the USB drive to enter the Windows Recovery Environment.

Press any key when thePress any key to boot from CD or DVDmessage appears on the screen.

Select your language preferences and click theNextbutton to continue.

ChooseRepair your computerinstead of clicking theInstall nowbutton.

ClickTroubleshoot > Advanced options > Startup Repair.

Enter the Windows Recovery Environment.

Then, go toTroubleshoot>Advanced Options.

They have expertise in understanding specific OEM applications and the complex relationship between Acronis software and its products.

Recloning the Crucial SSD is the least effective method it’s possible for you to try.

It supportscloning HDD to SSDand allows you toclone SSD to larger SSD.

It not only supports Crucial SSDs such as Crucial MX500, Crucial BX500, Crucial P5 Plus, etc.

but also supports Samsung 870 EVO, WD Black SN750, SanDisk Ultra, and so on.

There are two cloning modes available in MiniTool ShadowMaker used sector cloning andsector by sector cloning.

Download a free MiniTool ShadowMaker Trial Edition for 30 days.

MiniTool ShadowMaker TrialClick to Download100%Clean & Safe

1.

Connect the Crucial SSD to the PC.

Launch the software and clickKeep Trialto continue.

After entering its main interface, you better clickToolsin the toolbar and clickClone Disk.

If you choose the Same disk ID option, one of the disks will be offline.

So, dont change the disk ID mode.

You are required to choose the source disk and target disk to begin cloning.

Just do it and then the cloning process will start without restarting Windows.

It offers two cloning features:Copy DiskorMigrate OS to SSD/HD.

Download and install MiniTool Partition Wizard on your gear.

If there are bad sectors on the source disk, the cloning may not succeed.

you might perform a disk test using MiniTool Partition WizardsSurface Testto test whether some bad areas exist.

Here is how to check it:

1.

Launch it to enter its main interface.

Then, click theStart Nowbutton to check the hard drive for errors.

After the process is completed, the scanning result will be displayed.

If there are many red blocks, it means that your SSD health is bad.

Then, runchkdsk /rto locate bad sectors and recover readable information.

Now, start cloning again.

1. launch the software to enter its main interface.

ClickCopy Diskin the left panel and then clickNextto move on.

Choose the disk you want to copy and clickNext.

4. go for the destination disk for the copied disk and clickNext.

After ensuring that there are no important data on the target disk, clickYesto confirm the operation.

Select copy options based on your need and clickNext.

ClickFinish > Applyto execute the operation.

you’re able to try the mentioned solutions one by one until the issue gets fixed.

If you have any suggestions about MiniTool software, just share your ideas via[email protected].

Thanks for your support!