However, even the best computers in the world can malfunction sometimes, the Acer laptop is no exception.

How to Fix Acer Laptop Stuck on Acer Screen?

Remove the battery from the battery compartment and then press thePowerbutton for at least 15 seconds.

laptop stuck on Acer screen

If Acer laptop stuck on startup screen crops up again, just try the next solution.

What happens during the restarting process?

Get answers from this guide -Why Rebooting a Computer Fixes Problems?

How To Check The Battery Health Of Your Laptop

If the battery is broken, kindly change a new one.

The computers battery could lose charging capabilities as time goes by.

you could check the battery health to determine whether you need a replacement.

connect Acter with an external monitor

Tryconnecting your system to an external monitorto see if the screen displays on it.

Connect an external monitor to your Acer laptop.

If the monitor shows nothing, pressF4until the screen image displays.

the Automatic Repair screen

In this case, installing the latest graphics and chipset driver is an effective fix for you.

Press thePowerbutton to power off your laptop and reboot it several times when you see theWindowslogo.

Then, you will see theAutomatic/Startup Repairscreen.

enable Safe Mode

Next, go toTroubleshoot>Advanced options>Automatic/Startup Repair.

Chances are that Windows Automatic Repair may stop working at times.

Every problem has a fix.

load to BIOS

Repeat the first 2 steps in Solution 4 to enter Windows Recovery Environment.

Tap onTroubleshoot>Advanced options>Startup options.

PressF4,F5orF6to enable Safe Mode with Networking or Command Prompt according to your needs.

What Is Acer Boot Menu? How To Access/Change Acer BIOS

Press and hold thePowerbutton for about 15 seconds until your machine shuts down completely.

Power on your gear.

Once theAcer logoappears, immediately pressF2to enter the BIOS.

reset this PC

Tip: PressingF2enables you to enter the BIOS menu in most Acer laptops.

If you are using an older model Acer laptop, you might pressF12orDel.

PressF9and hitEnterto load the default configuration.

the Backup page

PressF10> tap onEnterto save and exit.

This operation will initialize your machine to its original status.

Heres how to do it:

Step 1.

go to Media Builder

Boot your Acer laptop to Windows Recovery Environment using a repair disk.

Go toTroubleshoot>Reset this PC.

PressCloud download>Local reinstalland then follow the instructions on the screen to reset your system.

How to Fix Acer Laptop Screen Black But Still Running? Try 7 Ways

If necessary, you better visit the local authorized service center to repair your laptop.

Will you try the solutions above one by one until your problem gets fixed?

The answer is no!

There is a better remedy for you.

Download, install and launch MiniTool ShadowMaker Trial for free.

MiniTool ShadowMaker TrialClick to Download100%Clean & Safe

Step 2.

PressKeep Trialand then go to theBackuppage.

As it’s possible for you to see, your operating system is selected by default inSOURCE.

Therefore, you only need to go toDESTINATIONto select a storage path for your system image file.

HitBack Up Nowto start the backup task.

My Acer laptop fails to boot up and it is stuck on Acer logo screen.

I used to consider this problem a rocket science.

However, I manage to solve it easily with the fixes mentioned in this article.

Hope they can also secure your day.Click to Tweet

Is your Acer laptop screen black when switched on?

Why does this happen?

How to fix Acer laptop black screen?

Go to find answers from this post.

We Need Your Voice

Thats all about Acer laptop stuck on Acer screen.

We sincerely hope that this guide is helpful to you.

We are looking forward to receiving feedback from you!

There might be some software issues or hardware issues with your box.

The former refers to infected files or applications, incorrect BIOS configs, and unmatched GPU drivers.

The latter refers to battery issues and connecting too many external storage devices.

Boot your box with a bootable flash drive and enter WinRE.

Then, go toTroubleshoot>Reset this PC>Keep my files/Remove everything>Cloud download>Local install.