Additionally, we will introduceprofessional data recovery softwareto assist you in recovering data from your Kingston SSD.
Are you bothered by a (new) Kingston SSD not detected or showing up on Windows?
you could find the reasons and fixes here.
Another common issue is:Kingston SSD managernot detecting SSD.
Now, we will introduce some effective solutions to make the Kingston SSD work normally again.
If the issue persists, you could continue with the following solutions.
If there are important files in the SSD, youd betterrecover filesfrom it to protect your data.
Maybe you will ask whether the software can detect that SSD.
you might also recover up to 1GB of files without paying any cent.
Download and install MiniTool Power Data Recovery Free Edition on your PC.
Step 2. check that you have connected the Kingston SSD to your PC.
Launch the software to enter its main interface.
This software will display all drives it can detect under theLogical Drivestab.
you’ve got the option to also switch to theDevicestab to check all the detected disks.
The entire scanning process will take a few minutes.
For the best data recovery results, it is advisable to wait until the scanning process completes.
By default, the software displays these files by path.
Step 5. choose the needed files.
you’ve got the option to select multiple files from different paths.
Click theSavebutton, and then choose another location to save the selected files.
you could see it is easy to rescue your files from a Kingston SSD.
If yes, you could check the status of the drive.
If the drive shows as:UnknownandNot Initialized, it will not show up in File Explorer.
How to Initialize a Kingston SSD?
In Disk Management, right-poke the uninitialized SSD, then selectInitialize Disk.
SelectMBRorGPTaccording to your requirement.
ClickOKto save the setting.
Up to this point, the SSD remains invisible in File Explorer because it is recognized asUnallocated.
you gotta create one or more partitions with assigned drive letters to make it visible.
How to Create Partitions on a Kingston SSD?
Right-poke the unallocated space and selectNew Simple Volume.
Click theNextbutton on the pop-up interface.
Specify the volume size, then click theNextbutton to continue.
Assign a drive letter for the partition on the next interface.
Then, click theNextbutton to continue.
Select a file system for the partition and add a volume label.
Then click theNextbutton to continue.
Click theFinishbutton to complete the whole process.
you’re able to try MiniTool Partition Wizard.
To make it visible, it can add a drive letter to it.
Right-tap the drive that has no drive letter and then selectChange Drive Letter and Pathsfrom the context menu.
Click theAddbutton to continue.
Assign a drive letter, and then click theOKbutton.
After these steps, you’re free to test whether the Kingston SSD appears in File Explorer.
The exact key may vary depending on your computers manufacturer.
Navigate to theAdvancedorIntegrated Peripheralssection in the BIOS/UEFI.
Ensure that the SATA or PCIe port to which your SSD is connected is enabled.
If its disabled, enable it.
Go to theBootorBoot Ordersection and confirm that the SSD is listed as a bootable equipment.
If its not, you should adjust the boot order to prioritize the SSD.
Depending on your system, you may need to adjust configs related to Secure Boot or Legacy/UEFI Boot.
confirm these controls are configured appropriately for your SSD and system configuration.
Save the controls and exit the BIOS/UEFI.
your gear will restart.
Once your system boots up, verify if the SSD is now recognized.
you’re free to useMiniTool ShadowMakertobackup fileson the drive.
MiniTool ShadowMaker is capable of backing up files, folders, partitions, disks, and systems.
Its crucial to check both hardware and software aspects, as the problem can stem from various sources.
Remember to back up your data regularly to prevent data loss in case of unexpected SSD issues.
