Lenovo Stuck on Boot Menu/Lenovo Screen
Computer issues, especiallyblue screenorstuck on loading screenalways appear unexpectedly.
), boot issues can occur.
Dont freak out when running into the issue of Lenovo stuck on boot menu.

In this article, you might find some straightforward and effective troubleshooting tips.
Next, perform a hard reset.
Only connect the AC Adapter and power on the laptop.

If Windows can boot, shut down, reconnect the battery and your external devices.
Fix 2: Remove a Lenovo DVD Drive
Does your Lenovo laptop have a DVD drive?
This sounds weird but it works to fix your issue in some cases.

and monitor the systems health.
you could press the F1/F2/F9/F10/F11/F12 key while booting to enter the boot menu and find & run Lenovo Diagnostics.
To run automatic repair, a Windows repair disc is required.
![]()
Then, boot the Lenovo computer from the disc and clickRepair your computerto enter the recovery interface.
In Windows 10, go toTroubleshoot > Advanced options > Startup Repair.
Then, follow the on-screen prompts to finish the automatic repair operation.

Laptop stuck on Preparing Automatic Repair during startup?
Read this post and find out how to effectively solve this issue.
To fix Lenovo laptop stuck on Lenovo screen, repair the boot sector or BCD in Windows.

To do this work, you should run Command Prompt.
Next, throw in these commands below and pressEnterafter each command.
To get rid of this system issue, resetting BIOS to default configs is a solution.

As a result, the issue of Lenovo stuck on boot menu appears.
So, disable Lenovo Service Engine in BIOS.
Step 1: Boot your setup and press F1 or F2 to enter BIOS.

Step 2: Go to theSecuritytab, findLenovo Service Engine,and disable it.
The best way is to reset your Lenovo to factory tweaks.
Or you might run Lenovo OneKey Recovery to restore the system to the initial status.
![]()
Also, run your Lenovo PC from the disc or drive and then clickInstall nowin the Windows setup interface.
Then, finish the clean install of Windows by following the instructions on the computer screen.
How to fix Lenovo laptop stuck on Lenovo screen?
![]()
These solutions are helpful to you to get rid of this situation.
However, you should know the operation can lead to data loss.
Thus, before performing one of these two tasks, create a backup for your important files.
Backing up files or folders is not a difficult job.
But when your Lenovo fails to boot, things become a bit complicated.
Fortunately, it’s possible for you to ask MiniTool ShadowMaker for help.
Besides, disk cloning and file sync are supported.
Download MiniTool ShadowMaker by clicking the button for backup.
Step 2: fire off the Lenovo PC from the drive and then open MiniTool ShadowMaker.
Step 4: ClickBack up Nowto execute file backup.
PC is not booting but you want to back up files without booting to save them?
This post will show you how to back up data from a computer that wont boot.
To do this work, you’ve got the option to use MiniTool Power Data Recovery.
It is a professional data recovery software for Windows.
Within several clicks, you’ve got the option to easily get data back.
Then, start the data recovery.
Bottom Line
Is your Lenovo laptop stuck on Lenovo screen?
Dont worry and you’re free to make a run at fix this issue.
Just try these methods mentioned above if your Lenovo wont boot and get stuck on the splash screen.