Nintendo Switch Not Reading SD Card!
For most players, this storage capacity is not enough.
So, they usually insert a microSD card into the Switch to extend its space.
Step 1: Press and hold thePOWERbutton for at least three seconds.
Step 2: SelectPower Options, thenTurn Off.
Step 3: Press thePOWERbutton again to power on Nintendo Switch again.
If the issue persists, you’re free to try the next solution.
Why rebooting a computer fixes problems?
A dirty card might even damage the console.
If there is visible contamination on either one, you might need to replace the microSD card.
Even worse, you might need to send the console to retail for repair.
Step 3: Reinsert the microSD card
Swing the stand open to show the microSD card slot.
Then, you oughta insert the card into the slot under the Nintendo Switch Stand.
If the Switch microSD card is still not working, you will need to check for compatibility issues.
you might find the way to update the system in the next part.
The above are the basic requirements for Nintendo Switch microSD cards.
Here are the high-speed microSD card recommendations:
verify if your microSD card is supported by Nintendo Switch.
If not, it should be the cause of Switch microSD card not recognized.
you gotta replace it with a supported one.
An SD card is necessary for expanding the storage of Nintendo Switch.
But do you know which the best Micro SD card is for Switch?
Downloading and installing the system requires a smooth web connection connection.
Note: In most cases, Nintendo Switch can automatically perform a system update.
If you want to manually get the update, you’re able to use the following steps.
If the system wont update, you’re free to restart the console and loop back and try.
Step 1: ClickSystem Settingsfrom the HOME menu.
Step 2: Scroll down and selectSystem.
Step 3: SelectSystem Updateon the System options interface to start the system update process.
The console will restart when the update ends.
You just need to wait until the entire update process ends.
If a system update doesnt help you out, you oughta check the microSD card for issues.
If so, your Nintendo Switch console will not recognize the card.
After that, you could format the card without data loss.
This software can find existing, deleted, and lost files on a drive.
Files on a logically damaged microSD card are still there.
So, you’re free to use this software to recover data from the card.
it’s possible for you to also use this freeware to recover up to 1 GB of files.
Step 1: Download and install MiniTool Power Data Recovery on your PC.
Then, you better hover over the microSD card and click theScanbutton to start scanning the card.
you might open each path to find your needed files.
Of course, you should not save them to the original microSD card because it is still damaged.
Here is more than one way to reformat a card.
you’re free to also use third-partypartition managerlike MiniTool Partition Wizard to format the card.
In this section, we briefly introduce two simple methods.
Way 1: Format the microSD card in File Explorer
Step 1: PressWindows + Eto open File Explorer.
Then clickThis PCfrom the left panel.
Step 2: Right-choose the damaged microSD card and selectFormatfrom the context menu.
Step 3: The file system supported by Switch for microSD cards is FAT32 or exFAT only.
Then, select or deselectQuick Formataccording to your requirements.
Step 4: Click theStartbutton to format the card.
Many features are available in the free edition of this software and formatting a partition is free for use.
Step 3: Set partition label and file system (FAT32 or exFAT) for the card.
Then click theOKbutton to continue.
Step 4: you’ve got the option to preview the card formatting effect.
If everything is ready, you’ve got the option to click theApplybutton to take effect.
In a situation like this, it’s crucial that you replace it with a new compatible one.
We hope it’s possible for you to find a proper method here.
Should you encounter issues when using our software, you could contact us via[email protected].
