What are the differences between NVMe and NAND?
This post fromMiniToolfocuses on NVMe vs NAND.
Besides, you’re able to use MiniTool software to clone your system to SSD.
Therefore, this topic NVMe vs NANDcomes into being.
What Is NVMe
What is NVMe?
NVMe is the abbreviation of Non-Volatile Memory Express.
It is a new storage access andfile transfer protocolforflash memoryand next-generation SSD (solid-state drives).
So it is much faster than HDD (hard disk drive) and traditional all-flash architecture.
Related articles:
What Is NAND
What is NAND?
NAND is a kind of flash memory.
It can be found in SSDs, USB flash drives and SD cards, and other storage devices.
NAND memory is non-volatile, which means it retains its data even when the power is turned off.
Also see:NAND SSD: What Does NAND Flash Bring to SSD?
NVMe is the connection protocol used to transfer data to and from the motherboard.
NAND and NVMe arent in competition with each other.
Instead, when used together, they can deliver fast read and write speeds for data-intensive applications.
SATA and NVMe operate with NAND flash memory, which is the most common flash memory used in SSDs.
Here, we can see the advantages and disadvantages of NVMe SSD and NAND SSD.
Two-dimensional or planar NAND is still a more cost-effective punch in as of 2018.
Developers should consider many factors when reviewing flash memory options, including pricing and product availability.
Thus, the question isnt NVMe vs NAND, but rather NVMe vs SATA.
NVMe drives are much faster than SATA drives that have been around for many years.
There are several different form factors for NVMe drives.
The most common of these is the m.2 rod, as shown above.
They are 22 mm wide and 30, 42, 60, 80 or 100 mm long.
To do that, you could choose to migrate HDD to SSD.
So, the professional SSD cloning software MiniTool ShadowMakeris strongly recommended.
To clone OS from HDD to SSD, MiniTool ShadowMaker is competent with theClone Diskfeature.
Step 1: Download MiniTool ShadowMaker from the following button.
MiniTool ShadowMaker TrialClick to Download100%Clean & Safe
Step 2: Install and launch MiniTool ShadowMaker.
Then, clickKeep Trialto enter its main interface.
Step 3: After entering the main interface of MiniTool ShadowMaker, go to theToolspage.
Step 4: Next, click theSourcemodule to choose the disk clone source.
Step 5: Click theDestinationmodule to choose the target disk.
Here you should probably choose the NVMe SSD or NAND SSD as the target disk.
Next, click theOKbutton.
Step 7: Then the disk cloning process will begin.
yo do not interrupt the cloning process until it is finished.
If both of them are connected to your rig, one of them will be marked as offline.
So, it’s crucial that you remove or disconnect the old hard drive.
After that, your rig performance will be improved.
In addition to MiniTool ShadowMaker,MiniTool Partition Wizardis also a great tool to clone a hard drive.
Here is how to clone the system with MiniTool Partition Wizard.
Step 1: Download and install MiniTool Partition Wizard.
Then, clickCopy Disk WizardfromWizardin the action panel.
Step 3: Choose the target drive to copy the content of the source drive to.
Then, you will receive a warning message All data on the disk will be destroyed.
Then, clickNextto continue.
To only copy the hard drive, ignore this warning.
Step 6: Preview and ensure all partitions are being copied to your new SSD.
If everything is OK, clickApply.
It requires you to reboot the computer and you better wait for the process to be finished.
Bottom Line
This post has introduced information about NVMe vs NAND.
