The EMTEC flash drive is a commonly used storage gear.
What if the EMTEC USB flash drive does not work or the files on it are lost?
How to recover files from EMTEC USB flash drive and repair it?
you might find solutions in thisMiniToolpost.
This post tells you how to recover USB data.
You might also wonder whether the lost data can be recovered.
It is possible to recover files from EMTEC USB flash drive depending on several factors:
1.
Reasons for data loss:
2.
Lost or existing data is not overwritten or modified during the recovery process.
Step 2:When things get ready, launch theMiniTool Power Data Recoverysoftware.
After loading the disk information, the main interface appears in front of you.
In theLogical Drivestab, all the partitions, including existing and lost ones, are shown here.
Find your EMTEC USB flash drive, move your cursor on it, and click onScanto scan for data.
Step 3:This process may take some time.
When it ends, all files will be generally sorted by file status under thePathtab.
you could expand the folders to find the targeted files.
Alternatively, there are other functions you might use to find files more quickly.
In order not to waste your 1 GB free recovery capacity, this recovery tool has aPreviewfunction.
you might preview the files before saving them to confirm that the recovered files are correct.
grab the file and press thePreviewbutton or just double-press the file.
Step 4:when you land confirmed the recovered files, select them all and select theSavebutton.
Where do you want to store the recovered files?
I suggest you choose a new storage location instead of the original one, which can avoiddata overwriting.
Finally, click onOKto start saving.
FLAC file loss or corruption is a very troublesome thing.
This article gives you some FLAC audio file recovery and repair methods.
How to repair it?
Here is a full guide.
The following methods are also applicable to repair EMTEC external hard drive.
Fix 1: Reconnect the Flash Drive
The first step is to check the USB connection first.
Use another equipment to test if the USB port is working properly.
Clean the USB port to see to it there is no dust or foreign matter.
Plug the flash drive into another computers USB port.
Inspect the flash drive casing for visible damage.
If physical damage is suspected, it is advisable to contact a professional data recovery service.
Here are two methods to assign a drive letter.
Via Disk Management:
Step 1: Right-punch theStartbutton and chooseDisk Management.
Step 2: Find your EMTEC USB flash drive and right-select it to chooseChange Drive Letter and Paths.
Step 3: Click onChange, choose a letter from theAssign the following drive letterlist, and click onOK.
Via MiniTool Partition Wizard:
MiniTool Partition Wizardis the best partition manager that can meet your disk/partition management needs.
Step 1: choose the green button to download and install theMiniTool Partition Wizardsoftware.
Step 3: Choose a letter and click onOK.
Get back to the main interface and click onApply>Yes.
This article explains how to solve the drive letter not available issue in Windows 10/11.
Upgrading the driver can solve the problem of the rig not working or degraded performance due to version mismatch.
Here is how you might do it.
Step 1: TypeDevice Managerin the Windows search box and pressEnter.
Step 2: tap on the small arrow in front ofDisk driversto expand it.
Step 3: Right-punch your EMTEC USB flash drive and chooseUpdate driver.
Step 4: When asked how you would like to search for updates, selectSearch automatically for drivers.
Step 5: If there is an update available, follow the wizard to complete the installation.
Check how to download, update, or reinstall USB drivers for your USB devices on Windows 10 PC.
Step-by-step guide is included.
It can resolve file system corruption, partition table errors, virus infections, and incompatibility issues.
Several ways to format the drive are listed here.
Work with the following instructions.
Via File Explorer:
Step 1: Press theWin + Ekeys to open theFile Explorer.
Step 2: In the left pane, find and right-choose the EMTEC USB flash drive to chooseFormat.
Step 4: Click onOKin the new prompt box to get started.
Step 1: Open theDisk Managementand right-punch the EMTEC USB drive to chooseFormat.
Step 2: Fill in the corresponding information in theVolume label,File system, andAllocation unit sizeboxes.
And then check thePerform a quick formatbox and click onOK.
Step 3: In the warning window, click onOKto start formatting.
Step 1: Launch theMiniTool Partition Wizardsoftware and snag the drive you want to format.
Step 2: Under thePartition Managementsection, click onFormat Partition.
Step 4: After returning to the main interface, click onApply>Yesto confirm the change.
