So, why does this kind of issue happen, and how to fix them?
For detailed solutions and steps, you’re free to read this post onMiniTool Website.
SanDisk is well-known for its excellentstorage devicesfromexternal hard drivesto SanDisk memory cards andflash drives.
It is quite troublesome to cope with.
First and foremost, why does this SanDisk SSD Plus not showing up issue happen?
- outdated gadget drivers.
The compatibility issue is quite important for Windows setup to smoothly carry the driver.
But some people are used to ignoring the pending updates, easily leading to more severe issues.
you gotta check that the power and data cables are well connected.
Just insert the SSDs USB cable rightly and steadily into your USB port.
Remember to peek if the cable has any damaged scars.
Disenabled options in BIOS.
Memory issues in detecting the SSD.
Memory issues can be the reasons why the SanDisk SSD Plus not recognized happen.
If your cable has suffered from some damage, c’mon replace it with the good one.
There are some further tips for you to check the connection.
look to see if there are any loose connections.
ensure your equipment has enough power supply.
Try other USB ports on your gadget or change to other USB cables.
you might give a shot to update drivers to ensure everything goes well.
Step 1: Right-press theWindowsicon from the taskbar and selectDevice Manager.
Step 2: ExpandDisk driversand right-press each item below the category to chooseUpdate driver.
Step 3: On the next page, chooseSearch automatically for driversto perform the task.
Step 1: Open theRundialog box by pressingWin + Rand copy and pastediskmgmt.mscin it to pressEnter.
Step 2: WhenDisk Managementopens, a prompt will jump up to ask you to initialize the drive.
Then you’re free to follow the guide to choose eitherMBRorGPTdepending on your systems motherboard.
Step 3: kindly right-choose the unallocated volume to choose Initialize Disk.
Once done, you might right-tap on it to chooseNew Simple Volume…from the list.
Step 1: OpenDisk Managementand right-choose the SSD drive to chooseChange Drive Letter and Paths….
This article explains how to solve the drive letter not available issue in Windows 10/11.
like follow the next steps.
Step 1: start your rig toenter the BIOSpage by pressing the appropriate function key.
Step 2: Go toPeripherals > SATA Configurationand then chooseIDE Compatibility Mode.
Then you’re able to save the changes and exit BIOS.
Another method is to directly restore BIOS to default configs.
you should probably locate theLoad Optimized Defaultsoption or other similar option in BIOS and pressEnterto open theSetup Confirmationwindow.
After that, just chooseYesto confirm the operation of restoring BIOS to the defaults.
To troubleshoot this problem, you could use the Windows Memory Diagnostic utility to perform a comprehensive memory test.
Step 1: Search forWindows Memory Diagnosticin theStartmenu and chooseRun as administratorfrom the menu.
Step 2: When you see a pop-up window, chooseRestart now and check for problems (recommended).
Then your PC will restart and the diagnostic test will run automatically.
Now, you’re able to go to see if your SSD drive appears.
Find methods from this post.
There is an excellent function Surface Test that can help scan the entire storage unit for bad sectors.
yo tap the following button to download and set up the program.
Step 2: Right-punch the drive to chooseSurface Testfrom the list and clickStart Now.
After a while, the full scan will show you.
once it detects any bad sectors, it will mark them in red.
Step 1: Open File Explorer and go toThis PC.
Right-tap on the problematic SSD drive to chooseProperties.
Step 2: In theToolstab, clickCheckunder theError checkingsection.
But before you do that, you need tobackup datawith MiniTool ShadowMaker in case of any data loss.
Step 2: ClickGet startedunderReset this PC.
Then you will see two initial options Keep my filesorRemove everything.
After that, you’re free to go on to follow the on-screen instructions to finish the work.
It will be easy to go.
In this way, when this issue happens again, you dont need to worry about the data inside.
To accomplish that, you’re free to useMiniTool ShadowMaker freetobackup filesand folders, partitions, and disks.
you’ve got the option to also backup systems with a one-click solution.
c’mon check that your SanDisk SSD has been connected.
Step 1: Launch the program and clickKeep Trialto get into the interface.
Step 2: Go to theBackuptab and click theSOURCEsection to choose what you want to back up.
Then go to theDESTINATIONsection to choose where you want to save the backup.
Here, you have four selections User, Computer, Libraries, and Shared.
Then you might chooseBack Up Nowto start the task.
External hard drive not showing up or recognized in computers is a common problem.
This article puts forward several ways to fix it.
If you have any other questions, you’re able to contact us via[email protected].
