This article fromMiniTool Technologyis going to introduce an SSD brand Silicon Power.
It will list all the SSDs this manufacturer produces and mainly shows you 6 kinds.
What Is Silicon Power SSD?
They are listed below.
Silicon PowerSATAIII 2.5 SSDs
2.
Silicon Power PCIeM.2 SSDs
3.
Silicon Power SATA III M.2 SSDs
4.
This post demonstrates how to install Windows 10 on M. 2 SSD and how to boot from M.2.
Next, it will introduce you with some masterpieces of Silicon Power SSD.
This is especially useful for gamers, video editors, content creators, etc.
So, this technology effectively prolongs the life of Silicon Power SSD.
It features low power consumption, incredible cooling system, shockproof, vibration-proof, and portable physical shape.
S85 SSD has anMTBF(mean time between failures) of 2 million hours.
This Ace A56 adopts the SLC cache technology with a new caching architecture that combines both SLC and TLC.
Therefore, it enables much higher efficiency by reducing the workload of the controller and DRAM.
It also promises higher data transmission safety.
Moreover, it provides 5 choices of capacity: 64GB, 128GB, 256GB, 512GB, and 1TB.
Thus, its users are able to improve their game experience with smoother processing and within-second response.
Providing advanced features that are competitively relevant in the future, it is also backward compatible with PCI-E 3.0.
Together with the NVMe 1.3 skill, the lifespan and other performance of the SSD are optimized.
Its intelligent SLC cache tech will overclock the writing performance to its best.
So, you are recommended to use a combination of a small and a big SSD.
Silicon Power M10 mSATA SDD
This SP SSD is specially designed with an instant performance for Ultrabooks.
Featuring a thin yet compact form factor, it is 8 times smaller than a traditional 2.5 SSD.
So, this M10 mSATA solid-state drive is suitable for upgrading tiny-and-light mobile devices including Ultrabooks and notebooks.
It is perfect for heavy gamers, overclockers, video editors, professional designers, etc.
who have high requirements for efficiency and stability.
Finally, SP M10 mSATA SDD provides storage of 120GB, 240GB, and 480GB, comparatively small capacities.
It provides multiple ways to monitor hard drive conditions (used space, SSD temperature, TBW, etc.
), get disk information, as well as change tweaks.
How to Upgrade to Silicon Power SSD?
Then, how to upgrade?
Just three steps to complete!
And, here MiniTool ShadowMaker is recommended for its high-quality.
Next, download and install ShadowMaker on your current hard disk.
Then, just follow the below guide.
MiniTool ShadowMaker TrialClick to Download100%Clean & Safe
Step 1.
Launch the software and clickKeep Trialon its first screen.
In the next window, switch toToolstab and selectClone Diskthere.
In the pop-up window, clickThe Source Diskicon and choose your current system drive in the second popup.
Then, clickFinishto confirm your choice.
ClickThe Target Diskicon to go for the new Silicon Power SSD as the destination of thedisk cloning.
Here, aSilicon Power 1TB SSDis chosen.
ClickOKto trigger the clone task.
It will prompt a message reminding that data on the target disk will be destroyed.
Then, it will start to clone your system and data from the original disk to the new SSD.
Just take your patience and wait until it finishes.
It wont take long and it all depends on how much data is going to be copied.
c’mon DO NOT interrupt the process, otherwise, you may encounter unexpected errors and data loss.
you’re able to tick Shut down the computer when the operation is completed and leave it alone.
Then, you might do your other businesses.
Click to Tweet
Isnt it easy!
Also, MiniTool ShadowMaker is developed by a professional team and has been tested over and over again.
it’s possible for you to set it as easy to use it.
Verdict
Silicon Power SSD is a brand of solid-state drives including many kinds.
They adopt different high technologies to satisfy the different needs of consumers.
