SSD reports wrong size is an annoying issue that troubles lots of users.
If you are encountering this problem, youve come to the right place.
SSD reports wrong size often occurs after reinstalling Windows,cloning an SSD to a larger SSD, etc.
To make matters worse, this problem may also be accompanied by data loss or invisibility.
Why does the SSD not report the correct size in File Explorer or Disk Management?
If the SSD shows wrong size, you could perform some general troubleshooting steps.
In addition, you’ve got the option to update the SSD driver in equipment Manager.
Encountering the external hard drive shows 0 bytes issue?
Read this post to learn how to fix 0 used space and 0 free space corrupted external hard drive.
MiniTool Power Data Recovery even canrecover files from dead SSDs, corrupted SSDs, and formatted SSDs.
Now, nudge the button below to get MiniTool Power Data Recovery installed and start file recovery or extracting.
MiniTool Power Data Recovery FreeClick to Download100%Clean & Safe
Step 1. choose the target SSD to scan.
Launch MiniTool Power Data Recovery to go to its home page.
Here all drives on your machine are listed underLogical Drives.
If there are multiple partitions on the SSD, you could switch to theDevicestab and scan the entire disk.
The scan duration mainly depends on the data amount on the selected SSD.
For the best scanning outcomes, you are not suggested to halt the process midway.
Preview the listed files.
Alternatively, you could move on to theTypecategory list to locate needed items by file bang out.
Furthermore, theFilterandSearchfeatures are also helpful for finding the required files faster.
Save the required items to another drive.
Once you locate the desired files, it’s crucial that you check the checkboxes next to them.
Finally, click theSavebutton and choose a safe path to store the recovered items.
MiniTool Power Data Recovery Freecan help to recover 1 GB of files in total.
To break this limitation, you should probably use a full edition likeMiniTool Power Data Recovery Personal Ultimate.
Listed below are several useful methods to fix the SSD reports wrong size issue.
you’re able to implement them one by one until the issue has gone.
Solution 1.
MBRs are constrained by supporting only four main partitions and a volume size of less than 2 TB.
See Also:MBR VS GPT (Focus on Difference and How to Convert Safely)
Method 1. you’re free to complete the disk conversion process by using command lines.
In the Windows search box, typecmdand then click theRun as administratoroption from the right panel.
In the User Account Control window, select theYesoption.
In the Command Prompt window, bang out the following command lines.
PressEnterafter each command line.
Files get lost after converting your MBR disk to a GPT disk?
Now read this post to get useful ways to recover lost files after MBR to GPT conversion.
Use MiniTool Partition Wizard.
HereMiniTool Partition Wizardis highly recommended.
Download, install, and launch MiniTool Partition Wizard Free to enter its main interface.
Finally, click theApplybutton located in the lower left corner to make this change take effect.
My SSD reports wrong size because the disk is in MBR partition style.
Here you’re able to refer to the steps below to complete this task.
In File Explorer, right-click theThis PCoption and chooseProperties.
In the Windows controls window, clickAdvanced system controls.
In the new window, click theSettingsbutton under thePerformancesection.
Next, move on to theAdvancedtab, and clickChangeunder theVirtual memorysection.
Uncheck theAutomatically manage paging file size for all drivesoption, choose the SSD drive, then click theCustomize sizeoption.
After that, specify the initial size and maximum size, and then clickSet>OK.
Now, you might test whether the SSD capacity is correct.
If not, try the next way.
Solution 3.
Step 1.Open an elevated Command Prompt.
In the command line window, typepowercfg.exe -h offand pressEnter.
Next, go to File Explorer or Disk Management and check the SSD capacity.
This is why cloned SSDs dont show full disk capacity in File Explorer.
it’s possible for you to complete this task with its free edition.
Download, install, and launch MiniTool Partition Wizard Free.
In the new window, drag the handle until all unallocated space is occupied.
After that, clickOK.
Finally, click theApplybutton located in the lower left corner to apply this change.
Once this operation is performed, the SSD should show its full capacity.
Hope the approaches mentioned above are beneficial to you.
We are ready to help.
