And some detailed specifications of this HP NVMe SSD will be listed in this post.
Go on your reading for getting more information.
Thus, more and more companies would like to launch the solid state drive which has the NVMe feature.
And there is no exception for the HP company.
And the HP EX920 SSD is an NVMe product, so your system needs to support this protocol.
Introduction of HP EX920 SSD
And now, we will show other specifications of this HP NVMe SSD.
HP EX920 SSD comes with three different capacities which respectively are 256GB, 512GB, and 1TB.
And here, we will introduce specifications of 1TB HP EX920 SSD.
The form factor of this solid state drive is M.2 2280.
Its interface and protocol are PCIe 3.04 and NVMe 1.3 which can offer high speed than the conventionalSATAIII interface.
The HP EX920 SSD takes advantage of SMI SM2262 as the controller.
The random read and write of this HP NVMe SSD are 350,000 IOPS and 250,000 IOPS.
For the detailed information, it’s possible for you to see the following chart.
As a matter of fact, all data of this HP NVMe SSD come from high queue depth test.
And the high performance of this HP NVMe SSD comes from two critical parts and they combined together.
One is the 8-channel controller with SM2262 and the 3D technology has been improved when it stacked 64-layer together.
The combination of these two technologies has brought good performance.
The 1TB HP EX920 SSD just sells about $284 and 512GB sells about $167.
The smallest HP NVMe SSD just sells for $108.
To clone a hard drive, MiniTool Partition Wizard would be a good assistant.
It can complete the process with a few steps and would not bring any damage to the original data.
This HP EX920 SSD also has better performance and it is cheaper compared with other solid state drives.
