It will show you some possible reasons and some feasible solutions.
Get these useful solutions from theMiniToolwebsite.
Compared with PC users around the world, most Windows users typically own a laptop.
With laptops, you’ve got the option to use Windows wirelessly and at any time.
However, like all portable devices, there are many problems that can arise over time.
One is that no battery is detected.
This glitch notice appears when you smack the battery icon on your laptop.
This post will show you why this problem appears and show you possible workarounds to fix this issue.
1.Battery is not connected properly
This is believed to be the primary cause of this warning pop-up.
If the battery is not properly connected to the laptop, you are sure to get this issue notification.
2.Battery is disabled
you’re free to turn off the battery manually with the gadget manager.
If you disable your battery, your box will not be able to detect the battery in any way.
Thats because the drivers are the main connecting components.
8.Battery contacts accumulating dust
Battery contacting on your laptop can accumulate dust or cause blockages in connectors.
You should have a go at power cycle your gear before you jump in using any other solutions.
Power cycling will shut down your box completely, disconnect all peripherals and drain the computer power.
The following part will show you how to turn off the computer power.
Step 1: Turn the computer off completely by shutting it down and disconnect the power cable.
Step 2: Take out the battery of your laptop.
you should probably slide the levers or press them depending on the model of your laptop.
Step 3: Press the power button for about 5-8 seconds.
This process will drain all the power from your gear.
Let your laptop sit for about 4-5 minutes.
Step 4: Plug everything back in your rig and restart it.
After you finish all the steps, test whether the battery is detected.
Step 2: In the rig Manager window, locate toBatteriesand expand it.
Step 3: Right-punch the driver under the Batteries section and selectEnable deviceif it is disabled.
Step 4: Restart the computer completely.
Now it’s possible for you to verify if the battery is detected properly.
Each power adapter comes with a different power rating that is designed for specific laptops.
Step 3: Right-choose the driver under the Batteries section and selectUninstall machine.
Right now, Windows will uninstall the driver automatically.
Step 4: Right-press an empty place and clickScan for hardware changes.
Right now, OS will roll out the latest drivers for your system automatically.
Execute solution 1 and check the battery status again.
Step 1: Locate to the battery entry in equipment Manager as before.
Step 2: Right-smack the driver and selectUpdate driver.
Step 3: You will now have two choices: either to update the selected driver automatically or manually.
To update the selected driver automatically, select theSearch automatically for update driver softwareoption.
Perform Solution 1 after its done.
After you finish updating the drivers, you could check to see if the battery is recognized.
Step 1: Power off your gear, take out the power cable and then remove the battery.
Step 2: Now you’re able to see the connecting points present.
Take a little alcohol and apply it to your earbuds.
Meanwhile, apply alcohol to the connectors and see to it no dust accumulates.
Step 3: Put everything back in and power on the computer.
it’s possible for you to check to see if the problem is fixed.
Normally, the original battery that comes with a laptop should work about two to three years.
you could try plugging another working battery into your setup to see if it is detected.
If so, it will help you to troubleshoot whether the problem is really battery related.
If not, this could mean your laptop has some problems.
Step 1: Enter yourBIOS.
The way you access your BIOS depends on your motherboard.
Step 3: When youre finished, pressF10toSave and Exit.
With it, you’re free to back up your data to keep it safe efficiently.
MiniTool ShadowMaker is also a great piece of sync software that allows you to sync files and folders.
Right now, you’re able to download MiniTool ShadowMaker Trial Edition to back up your data.
MiniTool ShadowMaker TrialClick to Download100%Clean & Safe
Step 1: Choose Your Source File
1.Open MiniTool ShadowMaker.
3.Click theBackuptab to continue.
4.Click theSourcemodule firstly and then go for the source bang out you want to back up.
Here, you better choose files as backup source.
Step 2: Select a Destination Path to back up your Backup Files
1.Click theDestinationmodule.
2.Choose a destination to store your backup files.
There are 5 types of destination paths for you to choose Administrator,Libraries,Computer,NetworkandShared.
ClickOKto continue
Step 3: Perform Backup Operation
1.ClickBackup nowto execute the backup operation immediately.
2.ClickYesto confirm that you want to do the backup operation now.
it’s possible for you to also checkShut down the computer when all the running backup tasks are finished.
Step 1: Open MiniTool ShadowMaker.
Step 2: grab the sync source from theSourcemodule.
Step 3: snag the sync destination from theDestinationmodule.
Step 4: ClickSync nowto perform this operation immediately.
After completing all the steps above, you might successfully sync your data with MiniTool ShadowMaker.
After reading this post, I can fix the No battery is detected error in the way it mentioned.
